- 20 set 2019, 17:14
Seguiste estes passos todos?
Registration & Automatic binding (Smart Match )With the FrSky ACCESS protocol, the transmitter/transmitter module can bind receiver without using the "F/S" button.Follow the step below to finish the Registration & binding procedure:1. Put the transmitter/transmitter module into [Reg] status.1.1 For Taranis X-Lite Pro as an example, turn on the transmitter, go to the MENU-MODDEL SETUP-PAGE 2, choose Internal or Extermal RF, and select [Reg].2. Connect the battery to the receiver while holding the F/S button on the receiver. The RED LED and GREEN LEDon the receiver will be on, indicating into the [Reg] status. Select [ENTER] on the transmitter, The RED LED andGREEN LED will flash, and the transmitter displays [Registration ok].3. Turn off the receiver.4. Move the cursor to select the receiver1 [Bind].5. Connect the battery to the receiver, the GREEN LED will flash, indicating into the [Bind] status. Select the RX, the GREEN will keep lit, and the transmitter displays [Bind successful].6. The transmitter exit [Bind], GREEN LED will keep lit, RED LED will be off, indicating Working normally.